Welcome: SHENZHEN TWOGAIN ELECTRONICS CO,.LTD
Language: Chinese ∷  English

Constant Voltage Controller

  • LED Controller
  • LED Controller
  • LED Controller
LED ControllerLED ControllerLED Controller

LED Controller

  • Power input: DC5V~40V
  • Choose wirless remote controller type
  • Frequency 433MHz
  • Distance of Wireless remote:≥35 meter
  • Product description:
  • INQUIRY

TG-V104:


1.TG-V104 Feature Function:

Automatic all adapts to DC-48V.

The change pattems of various built-in,adjust the light delicate no flicker.

Choose wireless remote controller type.

Accept the DMX512 signal input and transfer to the nest group of decoders.

Memory function.

Standard XLR-3R and RJ45.

Working with power amplifier to expand power output un limitedly

CE&ROHS


2.TG-V104 /TG-V203 Parameter:

Model

TG-V104

TG-V203

Input voltage

DC5V-DC24V

DC5V-24V

Output current

8AX4(RGBW)

5AX4(RGBW)

Output power

768w

480w

Frequency

433MHz

433MHz

Distance of wireless remote

>35 meter

>35meter

Change model

32

32

Level

256x256x256

Interface

3 pin-XLR,RJ45

Terminal block

Working temperature

-20~55

Dimension

L180*W62*H50

L87*W84*H25

Weight(N.W)

107g

Protocol

DMX512/1990 decoder



3.External dimension(mm)





III.Controller instruction for use


1.Antenna: 433MHz remote control signal receiving antenna.


2.Dip switch: Controller 512 channel address code setting

(controller when the decoder) and the function mode selected.


3.XLR-3R: DMX512 signal Input/Output interface,DMX512

signal Input  and DMX512  signal output interface,To next decoder.

1:DMX512 signal GND

2:DMX512 signal data-

3:DMX512 signal data+


4.Input/Output interface£ºthe controller power supply input and load output port.

V-:Input, the negative power supply

V+:Input, the positive power supply

V+:Output,  the positive LED lamp supply,Common terminal

R:Output,  Red color

G:Output,  Green color

B:Output,  Blue color

W:Output,  White color


5.DMX512 signal Input/Output interface: DMX512 signal Input and DMX512  signal output interface,To next decoder.

DO+: DMX512 signal(data+)output, To next decoder.

DO- : DMX512  signal(data-)output, To next decoder.

GND : DMX512  signal(GND)output, To next decoder.

DI+ : DMX512 signal(data+)intput,  Accpect DMX512 controller signal

DI- : DMX512 signal(data-)intput,  Accpect DMX512 controller signal

GND : DMX512 signal(GND)intput,  Accpect DMX512 controller signal


6.RJ45 interface: DMX512 signal Input  and DMX512  signal output interface,To next decoder.

1. DMX512 signal data+

2. DMX512 signal data-

3. NC

4. NC

5. NC

6. NC

7. DMX512 signal GND

8. DMX512 signal GND



IV.Remote control direction for use

A. Touch remote control

1.brightness-
2.brightness+
3.Full color adjustment ring
4.OFF key/study key
5.ON key
6.mode +
7.mode -

Touch remote study fucntion step:
1.Open on external power
2.Hold on remote controller OFF key three secode
3.LED controller will close LED load
4.Press  ON/OFF key to test study status
5.Close external power and open external power after study finish
6.Press  ON/OFF key to test study status had memory
Note.Repeat step 1 to step 6 if  learning failure


B. 24 key remote control


1.brightness+
2.brightness-
3.OFF key
4.ON key
5.flash mode
6.strobe mode
7.fade mode
8.smooth mode
9.full color shortcuts
10.study key

24 key  remote study fucntion step:
1.Open on external power
2.Hold on remote controller red key(R) three secode
3.LED controller will close LED load
4.Press  ON/OFF key to test study status
5.Close external power and open external power after study finish
6.Press  ON/OFF key to test study status had memory
Note.Repeat step 1 to step 6 if learning failure

V. Install figure

TG-V104  to LAMP


TG-V104  to LED
Power amplifier(AMP003)





PREVIOUS:TG-V103 NEXT:TG-10CTRL
Scan the qr codeClose
the qr code